Reno Concrete Pro
Get Matched

Repair & Resurfacing

Concrete Repair Cost in Reno & Sparks

As of September 2026, basic concrete resurfacing runs about $3–$7 per square foot nationally, and most residential crack/repair jobs total $600–$13,000. Reno Concrete Pro matches you with independent, licensed contractors for an on-site assessment and firm quote.

Cracked concrete driveway surface showing damage typical of freeze-thaw cycling before repair

Concrete repair & resurfacing cost (national benchmarks)

Basic resurfacing, per sq ft $3–$7
Decorative overlay, per sq ft $6–$10
Stamped overlay, per sq ft $7–$20
Patch/crack repair (labor-heavy), per sq ft $14.00–$16.65
Typical residential project, total $600–$13,000

Methodology: HomeGuide (2026-02-03) + Angi (2026-07-09) + Homewyse (pulled 2026-09-16), national; ConcreteWorks.io Reno directory estimate shown separately (RENO-037)

A note on Reno-specific pricing

No independently verified, Reno-specific per-square-foot repair or resurfacing rate has been published by any local business as of September 2026 — this is a genuine gap in this market, not an oversight on our part. One Reno-area contractor directory publishes its own general estimates (mudjacking $$3–$$6/sq ft, polyurethane foam injection $$6–$$12/sq ft, single-slab repair $$300–$$700) with its own disclaimer that these are general estimates, not fixed quotes — shown here for context, not as a verified local rate. The national figures above are the more reliable planning baseline until better local data exists.

Repair vs. replace

A contractor assessing a damaged slab is generally weighing: how deep and widespread is the damage, is the underlying base still sound, and is the crack cosmetic or a sign of ongoing movement. Surface spalling, isolated cracks, and minor unevenness are usually resurfacing or patch-repair candidates. Deep structural cracks, significant multi-directional heaving, or a slab that has settled unevenly across a large area more often point toward replacement — get an on-site, independent assessment rather than guessing from photos.

Common repair methods

  • Crack filling/sealing. The cheapest fix for narrow, stable cracks — stops water intrusion but is cosmetic, not structural.
  • Mudjacking or polyurethane foam injection (slab leveling). Raises a sunken slab section back to grade by injecting material underneath, rather than replacing the slab.
  • Resurfacing/overlay. A thin new layer bonded over sound existing concrete — refreshes the surface and can add a stamped or decorative finish, but won't fix a structurally failing slab.
  • Full replacement. Demolition and repour when the damage is too extensive or the base has failed.

Before you hire

Verify any contractor's Nevada NSCB C-5 license at https://app.nvcontractorsboard.com — and note that a legacy C-5b license is restricted to saw-cutting, drilling, and coring only, not full repair or replacement work. See How to Choose a Reno Concrete Contractor for the full vetting checklist.

Get Free Quotes